Click image to view full size image
BEECORE F104-1 type honeycomb panel composite expory adhesive:
Widely used for heat insulating material, polystyrene foam,
Fireproof material, fire door and window, paper honeycomb, aluminium honeycomb, and fire plate etc.
Technical Index:
Appearance: White, black
Density: 1.1-1.2g/ cu. Cm.
Viscocity: 5000-20000cps
PH Value: 6-8
Nonvolatile matter: 99% to 100%
Fire retardant character
Thermal decomposition humidity: Above 200° C
Self-ignition temperature: Above 310° C
Flash point: Above 270° C could be used for tank ship and Chemical carrier
Solubility: Soluble in acetone, acetic acid, ethyl ester etc
Wastage: Smooth surface at 180g/sq. M. Could save and economical
Constrcution Guide:
1. Clear the dirt and grease on surface
2. Coating glue on singleside equally by zigzag system scraper or spraying equipment.
3. Laminate the material on coating surface, Or could spray a little water mist on the glue surface, Then press tightly.
Storage:
Should be put in warehouse or low temperature room, time could not exceed 6 months.
Widely used for heat insulating material, polystyrene foam,
Fireproof material, fire door and window, paper honeycomb, aluminium honeycomb, and fire plate etc.
Technical Index:
Appearance: White, black
Density: 1.1-1.2g/ cu. Cm.
Viscocity: 5000-20000cps
PH Value: 6-8
Nonvolatile matter: 99% to 100%
Fire retardant characterThermal decomposition humidity: Above 200° C
Self-ignition temperature: Above 310° C
Flash point: Above 270° C could be used for tank ship and Chemical carrier
Solubility: Soluble in acetone, acetic acid, ethyl ester etc
Wastage: Smooth surface at 180g/sq. M. Could save and economical
Constrcution Guide:
1. Clear the dirt and grease on surface
2. Coating glue on singleside equally by zigzag system scraper or spraying equipment.
3. Laminate the material on coating surface, Or could spray a little water mist on the glue surface, Then press tightly.
Storage:
Should be put in warehouse or low temperature room, time could not exceed 6 months.